Pipe / Pipe Fittings / Wire

Central Vacuum 2 x 2 Adapter (Schedule 40 to Schedule 20)

---

This adapter enables 2" Schedule 40 PVC pipe to connect to 2" Schedule 20 PVC pipe.

---

Central Vacuum 3-Way 90 Degree Y-Sweep Fitting (FFF)

---

Sturdy 3-way 90 degree y-sweep fitting with all female connections. This fitting is used to connect two opposing inlet runs into one.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 45 Degree Elbow (FF)

---

Sturdy 45 degree elbow with all female fittings for gradual declines in your central vacuum installation.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 45 Degree Elbow (MF)

---

Sturdy 45 degree elbow central vacuum fitting with one male end and one female end. Used for gradual angles in pipe runs.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 45 Degree Y Fitting (FFF) [5525W]

---

Sturdy 45 degree WYE central vacuum fitting used to tie together central vacuum valves.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 90 Degree Long Elbow (FF)

---

Sturdy 90 degree long central vacuum elbow fitting with two female ends.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 90 Degree Long Street Elbow (MF)

---

Sturdy 90 degree long street elbow fitting with one male and one female end.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 90 Degree Short Elbow (FF) [5506W]

---

Sturdy 90 degree short central vacuum elbow fitting with two female ends. Used behind valve mounting plates in central vacuum installations.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 90 Degree Short Tee [5502W]

---

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum 90 Degree TY Pipe Fitting (FFF)

---

This 90 degree, all-female, TY shaped pipe adapter is used for descending piping in your central vacuum installation.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum Fitting Coupler (FF)

---

This female to female coupler is used to join lengths of 2" Schedule 20 central vacuum pipe together.

---

Central Vacuum Fitting Coupler (MM)

---

This male to male coupler is used to fit 2" Schedule 20 central vacuum pipe fittings together.

---

Central Vacuum Outside Venting Kit

---

Complete outside venting kit for central vacuum systems. This outdoor venting kit comes with everything that you'll need to get your central vacuum system exhausted outside, making the air in your home as clean as can be.

---

Central Vacuum Pipe 5' x 2" (10 Sticks - 50 Total Feet)
*Not Eligible For Free Shipping*

Our 2" Schedule 20 central vacuum pipe is shipped in a box containing 10 lengths of 5' pipe. This high-quality pipe is ultra-smooth and resists dirt build up so it's made to last a lifetime.

All pipe is ASTM rated and is Virgin plastic, not chipped or recycled which can lead to separation in certain climates. Remember to always insulate pipe in your attic in colder climates.

Note: The actual length of the pipe is 4'8.5", commonly referred to as 5' in the vacuum industry.

---

Special Note: Vacuum pipe does not qualify for free shipping unless it is ordered as part of a complete central vacuum system as it is considered an "over-sized" item.

Central Vacuum Pipe 5' x 2" (25 Sticks - 125 Total Feet)
*Not Eligible For Free Shipping*

---

Our 2" Schedule 20 central vacuum pipe is shipped in a box containing 25 lengths of 5' pipe. This high-quality pipe is ultra-smooth and resists dirt build up so it's made to last a lifetime.

All pipe is ASTM rated and is Virgin plastic, not chipped or recycled which can lead to separation in certain climates. Remember to always insulate pipe in your attic in colder climates.

Please Note: The actual length of one stick of pipe is 4'8.5", which is commonly referred to as "5'" in the vacuum industry.

---

Special Note: Vacuum pipe does not qualify for free shipping unless it is ordered as part of a complete central vacuum system as it is considered an "over-sized" item.

---

Central Vacuum Pipe Adapter (2" to 1-13/16")

---

Upgrade your older central vacuum systems to modern 2" piping with this adapter.

---

Central Vacuum Pipe Adapter (2" to 1-3/4")

---

This central vacuum pipe adapter allows you to add modern piping to your Kenmore central vacuum system.  This adapter converts older 1-3/4" pipe to newer 2" pipe.

---

Central Vacuum Pipe Cap Fitting [5547]

---

Use this tube stop cap to seal off pipe ends in your central vacuum system.

---

Central Vacuum Special Short 90 Degree Elbow (FF)

---

Use this special short 90 degree elbow with two female ends in tight spaces for your central vacuum installations.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum Tight 90 Degree Spigot (MF)

---

Sturdy, tight 90 degree spigot with one male and one female end.

Will fit 2" Schedule 20 central vacuum pipe.

---

Central Vacuum Valve Reducer Bushing

---

This central vacuum valve reducer bushing is designed to allow inlet valves to be added to your central vacuum system without the use of a mounting plate.

These are commonly ordered with a Standard Inlet Valve (24 V) [1500-1] and a 90 Degree TY Pipe Fitting (FFF) for best central vacuum airflow.

---

Central Vacuum Valve Stem Extender

---

If your home has custom, thick drywall, you can use this extender to add length to your inlet valves and connect to the rough-in.

---

Central Vacuum Wire Quick Clips [765544W]

---

These quick clips for central vacuum systems hold the low voltage wire onto the central vacuum pipe when you install it. This makes it easier and more efficient to install your central vacuum system.

---

Fire Stop 1.5" Pipe Collar

---

Designed to stop fire in between vacuum pipes, this 1.5" Fire Stop Pipe Collar is great protection from the hazards of fire in your central vacuum system.

---

Low Voltage Central Vacuum Wire (1000 ft. Pull Box)

---

Low voltage central vacuum wire sold in a convenient, 1000 ft. pull box.

---

Low Voltage Central Vacuum Wire (By the Foot)

---

Low voltage central vacuum wire, sold by the foot.

---

Surface Mount Valve Rough-In Box [025041]

---

The Surface Mount Valve Rough-In Box is ideal for unfinished areas such as basements or garages. Simply mount it on your concrete or garage wall. Works with low voltage valves with vertical screws.

---

Tubing Support Strap with Wire Holder

---

This handy tubing support strap and wire holder keeps your central vacuum pipe in place and the wires tangle free.

---

Vacpan Installation Kit

---

Easily install your new central vacuum vacpan with our pre-made vacpan installation kit.

---

Valve Kit With Pipe - Direct Connect (Almond)

---

These electric, direct connect valve installation kits include all the pipe, fittings, wire, glue, etc. that you will need to fully install a central vacuum in your home.  These valves have high voltage electricity running to them to power your vacuum's powerhead.

---

Valve Kit With Pipe - Direct Connect (White)

---

These electric, direct connect valve installation kits include all the pipe, fittings, wire, glue, etc. that you will need to fully install a central vacuum in your home.  These valves have high voltage electricity running to them to power your vacuum's powerhead.

---

Valve Kit With Pipe - Standard Universal (Almond)

---

This standard universal inlet valve installation kit includes all the pipe, fittings, wire, glue, etc. that you will need to fully install a central vacuum in your home. These valves have low voltage running to them enabling you to turn the power unit on and off.

Central vacuum attachment sets used with universal inlet valves will have a pigtail cord coming off of the end of the hose to plug into the wall, this will provide the high voltage electricity for the powerhead.

---

Valve Kit With Pipe - Standard Universal (White)

---

This standard universal inlet valve installation kit includes all the pipe, fittings, wire, glue, etc. that you will need to fully install a central vacuum in your home. These valves have low voltage running to them enabling you to turn the power unit on and off.

Central vacuum attachment sets used with universal inlet valves will have a pigtail cord coming off of the end of the hose to plug into the wall, this will provide the high voltage electricity for the powerhead.

---

Valve Kit Without Pipe - Direct Connect (Almond)

---

This kit is designed to be used with central vacuum installations that will be done with standard plumbing pipe. It includes everything you'll need to mount your inlet valves and adapt them to the plumbing pipe for the central vacuum system.

The valves included with this installation kit are direct connect valves which are designed to have high voltage electricity run to them to power the powerhead at the end of your central vacuum hose.

---

Valve Kit Without Pipe - Direct Connect (White)

---

This kit is designed to be used with central vacuum installations that will be done with standard plumbing pipe. It includes everything you'll need to mount your inlet valves and adapt them to the plumbing pipe for the central vacuum system.

The valves included with this installation kit are direct connect valves which are designed to have high voltage electricity run to them to power the powerhead at the end of your central vacuum hose.

---

Valve Kit Without Pipe - Full-Door (Almond)

---

This universal full-door valve kit with plumbing adapter is designed to be used with plumbing PVC pipe that can be found at a local hardware store. This kit includes everything you'll need to mount your central vacuum inlet valves and will help convert Schedule 20 pipe to Schedule 40 pipe with the included plumbing adapter.

---

Valve Kit Without Pipe - Full-Door (White)

---

This universal full-door valve kit with plumbing adapter is designed to be used with plumbing PVC pipe that can be found at a local hardware store. This kit includes everything you'll need to mount your central vacuum inlet valves and will help convert Schedule 20 pipe to Schedule 40 pipe with the included plumbing adapter.

---

Valve Kit Without Pipe - Universal (Almond)

---

This kit is designed to be used with central vacuum installations that will be done with standard plumbing pipe. It includes everything you'll need to mount your inlet valves and adapt them to the plumbing pipe for the central vacuum system.

The valves included with this installation kit are universal valves which are designed to have only low voltage electricity run to them, not high voltage which is capable of running the powerhead.

---

Valve Kit Without Pipe - Universal (White)

---

This kit is designed to be used with central vacuum installations that will be done with standard plumbing pipe. It includes everything you'll need to mount your inlet valves and adapt them to the plumbing pipe for the central vacuum system.

The valves included with this installation kit are universal valves which are designed to have only low voltage electricity run to them, not high voltage which is capable of running the powerhead.

---