Hose Handles & Other Parts

1-1/4" Central Vacuum Hose Cuff With Band [59655]

---

This central vacuum hose cuff is designed for use with 1-1/4" non-electric standard central vacuum hoses. It is threaded for easy installation and has a metal band to turn on the central vacuum when plugged in.

---

1-1/4" Metal Central Vacuum Hose Handle [6772-G]

---

This metal central vacuum hose handle is designed for use with 1-1/4" non-electric standard central vacuum hoses, plastic wands and other vacuum attachments. It features a 360 degree swivel handle, button lock and a built-in suction control.

---

1-3/8" Central Vacuum Hose Cuff With Band [7067-G]

---

This central vacuum hose cuff is designed for use with 1-3/8" non-electric standard central vacuum hoses. It's threaded for easy installation and has a metal band to turn on the central vacuum when plugged in.

If you purchase the 50' Standard Central Vacuum Hose [6453-50-G] then this end can be used with the Metal Central Vacuum Hose Handle [7719-G] to make custom hose lengths.

---

1-3/8" Metal Central Vacuum Hose Handle [7719-G]

---

This metal central vacuum hose handle is designed for use with 1-3/8" non-electric standard central vacuum hoses. It features a 360 degree swivel handle, button lock and a built-in suction control.  This handle can be used with most 1-1/4" plastic wands and vacuum attachments.

---

6' External Hose Cord

---

Replacement 6' external hose cord.

---

BEAM 120V Prism Wireless Repeater [100580]

---

BEAM 120V Prism wireless repeater module.

---

BEAM 3-Position Hose Switch Harness Assembly [170113]

---

Genuine BEAM wiring harness and switch assembly. This wiring harness will work with most BEAM, Cana-Vac, Electrolux and Plastiflex hoses that have handles that swivel independent of the hose itself.

---

BEAM Alliance 2G Analog Hose Handle Assembly [170198]

---

Replacement BEAM Alliance 2G central vacuum analog hose handle assembly with slide switch controls.

---

Important Note: There are no returns on this item.

---

Backordered

BEAM Alliance 2G Electronic Hose Handle Assembly [170195]

---

Replacement BEAM Alliance 2G central vacuum electronic hose handle assembly. This assembly comes with all necessary wiring and electronics.

---

Note: This part is on an extended backorder from the manufacturer. Consider purchasing an entire BEAM 30' Alliance Interface Hose [050928] as an alternative option.

There are no returns on this item.

---

Currently Unavailable

BEAM Central Vacuum Hose Hanger [045039]

---

This rounded heavy duty hose hanger will make storing your central vacuum hose quick and easy. This hose hanger includes all necessary mounting hardware.

---

BEAM Direct Connect Hose Plug [170179]

---

This BEAM direct connect central vacuum hose plug can be used with many different brands as long as it is the same shape.

---

BEAM Dolphin Style Hose Handle [170180]

---

This BEAM Dolphin Style central vacuum hose handle replaces the dolphin style handle commonly found on many central vacuum hoses.

If you also need the replacement switch harness, select the BEAM 3-Position Hose Switch Harness Assembly [170113].

---

BEAM Hose End Repair Kit [170152]

---

This quality BEAM central vacuum hose end repair kit will work with the BEAM 30 ft. Direct Connect Hose [050797DC] and the BEAM 35 ft. Direct Connect Hose [050798DC]. This repair kit will also fit other types of hoses.

---

BEAM Hose Handle Repair Kit [170112]

---

This BEAM Hose Handle Repair Kit for central vacuum hoses replaces the old gas pump and arched handle configurations.

This kit includes a new swivel handle replacement, hose switch assembly and adapter.

---

BEAM Low Voltage Hose Switch [170117]

---

Replacement low voltage switch for BEAM central vacuum hoses.

---

BEAM Prism Wireless Automitter [100632]

---

BEAM Prism 915mhz wireless system Automitter.

---

BEAM Prism Wireless Repeater [100633]

---

BEAM Prism 120V, 915mhz wireless central vacuum repeater module.

---

BEAM Total Control 3-Position Switch [315260]

---

Replacement BEAM 3-position central vacuum hose switch for use with the Total Control hose.

---

BEAM Total Control Hose Handle with Switch [170064]

---

This BEAM Total Control hose handle with switch contains everything that you'll need to fix your older style BEAM central vacuum hose handle.

Please Note: Depending on availability, this item may be black or white in color.

---

BEAM Total Control Hose Handle Without Switch [170409]

---

This gas pump style BEAM Total Control central vacuum hose handle without switch replaces the Total Control handle commonly found on many central vacuum hoses.

---

BEAM Total Control Hose Wiring Harness With Switch [605514]

---

Genuine BEAM Total Control central vacuum hose wiring harness with three position switch.

---

Cen-Tec 30' Hose Sock with Pull String (Gray) [37171]

---

This Cen-Tec gray hose sock slides over 30' hoses and protects walls and furnishings from any damage the hose may cause. It's soft to the touch and easy to apply over the hose.

---

Cen-Tec 8' Power Cord with Wall End Strain Molding [50547]

---

Genuine Cen-Tec replacement 8' cord with wall end strain molding for an interchangeable end.

---

Cen-Tec Switch and Wire Harness Assembly [50657A]

---

Genuine Cen-Tec switch harness assembly.  This is a four-wire, three-position toggle switch.  This harness is designed for use with Cen-Tec electric hoses and can be used with a soft-grip or standard handle.

---

Cen-Tec Wall End Hose Repair Kit [50569]

---

Genuine Cen-Tec repair kit for direct connect and pig tail hoses with an interchangeable wall end.

---

Hose Plug Adaptor (3-Prong - 2-Prong) [170106]

---

This 3-prong to 2-prong hose plug adaptor installs onto newer style hoses to enable them to fit older style powerhead extension wands.

When ordering a new hose to use with an older style, 3-prong powerhead, you may need to install this adaptor.

---

Low Voltage Hose Switch [170172]

---

Replacement low voltage hose switch.

Please Note: The wires are not included with the switch.

---

NuTone Hose Handle Tube [EMBO36]

---

Replacement hose handle tube for NuTone hose models CH515 and CH615 bought prior to January 2024.  This part is required to fit a replacement nozzle onto a CT175 wand.

---

Pig Tail Cord Repair Kit (Gray) [170211]

---

Pig tail cord repair kit for central vacuum hoses.  This kit includes a new cord and repair instructions.

---

Pig Tail Cord Repair Kit (White) [170210]

---

Pig tail cord repair kit for central vacuum hoses.  This kit includes a new cord and repair instructions.

---

Plastic Central Vacuum Hose Handle

---

This plastic central vacuum hose handle is designed for use with 1-1/4" standard, non-electric, central vacuum hoses. It features a 360 degree swivel handle and a built in suction control.  Only use plastic extension wands with this handle.

---

Plastiflex Hose Handle Shell [HD130GPR02]

---

This hose handle shell for central vacuum hoses replaces the old gas pump and arched handle configurations.

This is just for a replacement shell and does not include additional parts such as the switch.

---

VACUFLO 1.25" Universal Hose Adapter (Gray) [6933-G]

---

Genuine VACUFLO 1.25" universal hose adapter.  Will fit most inlet valves.

---

VACUFLO Deluxe Tool Caddy Wire Rack [7609-G]

---

VACUFLO's metal tool caddy is the perfect solution for organizing your central vacuum tools. The narrow design and sturdy steel construction make it the perfect for storing everything you have for your central vacuum system all in one place. This caddy attaches right onto the VACUFLO Metal Hose Rack [6524-G] for the ultimate in hose and tool storage.

---

VACUFLO TurboGrip Electrical Repair Kit [7851]

---

This is a genuine VACUFLO low voltage central vacuum hose switch for VACUFLO TurboGrip hoses which go with the TurboCat turbo nozzle. This switch will only work on hoses produced 1999 onward that have four contact points.

The switch with only two contact points has been discontinued by the manufacturer. You can find a replacement hose here.

---

VACUFLO TurboGrip Hose Handle [7728]

---

Genuine VACUFLO TurboGrip central vacuum hose handle. Will work on all 7348 and 7352 VACUFLO central vacuum hoses. If your hose is made prior to 1999 you will also need to replace the switch. The newer style switch has four contact points and is not included but can be found separately here.

It is not recommended to use replacement type handles from other manufacturers. The button is in the wrong place which will cause it to weaken and break sooner than a genuine VACUFLO handle.

Please Note: The handle and switch that only has two contact points has been discontinued by the manufacturer.

---

VACUFLO Wire Hose Rack [6524-G]

---

This high-quality steel metal hose rack from VACUFLO is able to hold up to 50' of central vacuum hose. Includes necessary mounting screws. Unleash the potential of this durable hose hanger and store all of your cleaning tools with the VACUFLO Metal Tool Caddy [7609-G] which can easily be removed so you can bring your tools with you as you clean.

---